How to Paint Steel Garage Doors to Look Like Wood

Posted by: | Posted on: July 27, 2018

You have noticed those stunning wooden garage doors round Canada, proudly embracing natural timber grain which arrives out of walnut, mahogany, walnut or cherry. Did you know you also can change ordinary steel garage doors to faux wooden grains? From the street, nobody will ever understand it is not wood. The best point to do, particularly if you are not experienced at this type of Paint Steel Garage Doors then call a professional garage door springs Fox Point WI.

 

Prepare the surface

As garage-doors come out, they often secure cluttered. Get going by cleaning your doorway completely with water and soap. Get dirt and debris away and let it dry.

Primary and Basecoat

If your doorway is fresh or has not been previously painted, then paint the full door using a primer. After the primer dries, cassette all the vertical panels with tape so that all the horizontal panels are all exposed. If you are unsure how it should look, simply take reference from the raised-panel cupboard door to tape off everything.

Paint the flat panels

Make sure that you utilize 100% acrylic latex paint designed for outdoor use on the alloy. You may paint the entranceway with a single jacket, however using two different-colored levels will make the wood grain influence appear greater. For just two layers, start out with a cream or tan coloration. Dip the brush to the paint and then paint the vulnerable panels. Permit the brush to draw lines and permit them to imitate wood grain. Paint each and every horizontal panel.

Apply the 2nd coat of paint

After the very first coat dries, then apply the same technique to apply a second coating of mahogany cherry or walnut, painting on the panels to make the timber grain result, making it possible for lines out of the very first coating to reveal through. Make sure that you fill all the areas with all the dark color to consistency. Once you are fulfilled by the results, take the tape off and paint that the perpendicular portions of the garage doors.

Test your skills first

Don’t feel daunted by the task. If you not sure of your artistic ability, conduct a couple of test pieces in the interior of the door where you can’t see it. Mix a number of hues which you would like and utilize different brushes, and soon you receive the combo of colors and brushes which work well for you personally. A stiff brush is very likely to generate far more grain patterns.

 

 





Shares